PVC Floor Drain Injection Mould

PVC Floor Drain Injection Mould Detail

Material:PVC-PP-ABS

Size:12*12cm   G.W:300g

PVC-PP-ABS Drain Color: white, gray or as per customers requirement

Mould Steel: P20

Mould Plate: C45

Delivery Time: 50 days

Cycle Time:12s

Injection Machine Size:300T

Our Products Features:  

1.made of high-grade plastic

2.good quality and easy to use

3.simple installation

4.light  weight

5.smooth and compact structure

PVC Floor Drain Injection Mould Design

Common Gate Designs of PVC Floor Drain Injection Mould

The largest factor to consider when choosing the proper gate type for your application is the gate design. There are many different gate designs available based on the size and shape of your part. Below are four of the most popular gate designs used by Quickparts customers:

The Edge Gate is the most common gate design. As the name indicates, this gate is located on the edge of the part and is best suited for flat parts. Edge gates are ideal for medium and thick sections and can be used on multicavity two plate tools. This gate will leave a scar at the parting line.

The Sub Gate is the only automatically trimmed gate on the list. Ejector pins will be necessary for automatic trimming of this gate. Sub gates are quite common and have several variations such as banana gate, tunnel gate and smiley gate to name a few. The sub gate allows you to gate away from the parting line, giving more flexibility to place the gate at an optimum location on the part. This gate leaves a pin sized scar on the part.

The Hot Tip Gate is the most common of all hot runner gates. Hot tip gates are typically located at the top of the part rather than on the parting line and are ideal for round or conical shapes where uniform flow is necessary. This gate leaves a small raised nub on the surface of the part. Hot tip gates are only used with hot runner molding systems. This means that, unlike cold runner systems, the plastic is ejected into the mold through a heated nozzle and then cooled to the proper thickness and shape in the mold.

The Direct or Sprue Gate is a manually trimmed gate that is used for single cavity molds of large cylindrical parts that require symmetrical filling. Direct gates are the easiest to design and have low cost and maintenance requirements. Direct gated parts are typically lower stressed and provide high strength. This gate leaves a large scar on the part at the point of contact.

Our Service

1. Your inquiry related to our products or prices will be replied within 24hours

2. Well-trained and experienced staffs to answer all your enquiries in fluent English.

3. Offering the support to solve the problem in the application or selling period.

4. Competitive prices based on same quality.

5. Guarantee samples quality same as mass production quality.

6. Welcome your 2D, 3D, and other drawings, we produce strictly according your design or your request.OEM&ODM are accepted.

7. Not only manufacture mould, but aslo supply product.

8. IF you are interested in our products .please contact us at your any convenience .we'd like to tell you more about our products.meantime,you only need to give us your requirements in detail for your products.we can design and produce for you very well.

9. We warmly welcome your visit,as it is said to see is to believe if possible.

Contact Me