Parts Material: ABS
Mould Steel: P20
Mould Cavity: Single cavity
Runner System: Hot runner
Hot Runner Brand: YUDO
Point Number:4 points
Ejection Technique:Ejector pin
Cycle Time: 60S
Mould Life: 500,000 shots at least
Injection Machine Tonnage:350T
Mould Delivery Time: 45 days
Why Washing Machine Parts Mould Choose YUDO Hot Runner?
YUDO specializes in Hot Runner system, which is the core components of mold, and manufacture all essential part internally including Nozzle, Manifold, Heater, Controller and so on.
Advantage of Hot Runner
- Shorter cycle time: No runner controlling the cooling time,reduce the washing machine producing time.
- Easier to start: Without runners to remove, and auto cycle occurs faster and more frequently, so we can get more washing machine parts.
- Fewer sink marks and under-filled parts: Unlike when plastic flows through a cold runner and loses heat to mold plates
- Design flexibility: Can locate the gate at many points on the part
- Balanced melt flow: Separate melt channels are in externally heated manifolds that are insulated from mold plates surrounding them.
Which Size Injection Machine Should We Buy?
This problem we will according to our washing machine mould size on basic and at same time, we could pay attention to mould cavity and product’s weight.
Our washing machine part mould only have 1 cavity, so we could accord to the mould size to choose suitable injection machine, this mould we choose 350T injection machine is enough.
Our Washing Machine Mould Test Video
A set of washing machine have many kinds of plastic parts, every parts should match fine, so all the parts mould make by one factory is good for clients. We know the plastic material shrinkage to design each parts, of course,if we are not sure the design,we will take the sample to mold flow analysis.
If you interested in our washing machine parts mould, contact us.