Plastic Milk Bottle Clip Mould

Plastic Milk Bottle Clip Mould

Mold steel: P20

Mould Base: C45

Cavity:1+1

Runner: Cold runner

Delivery Time: 40 days

Size:230*80*20 mm

Material: PP

Injection Machine: 80T

Plastic Milk Bottle Clip Mould Design

You may have the challenge:” How could I produce plastic bottle clip as efficiently and profitably as possible?” HoMe Mould could help on it by its superior design team for plastic bottle clip mould. To make it simple from three aspects: mould structure, mould steel, mould cooling.

1.Suitable Mould Structure

It depends on the detail plastic Bottle clip, such as the sliders design which could not be required when the clip are direct and simple; certain fixing design for further heat transfer printing.

2.Suitable Mould Steel

It should be considered with the plastic bottle clip production requirement, and the steels for different mould parts could be different, such as the P20, 718H, H13 and DIN1.2316… Finally customers get the better cost-effective moulds.

3.Optimal Mould Cooling

The cooling design would be well done when customers require shorter and shorter cycle time, besides the best cooling channels, the Cu-Be inserts also could help on the better cooling, the main parts could be bottom 

Quality Control

We are committed to providing every customer with high quality mold by below steps.

1) Raw material inspection;

2) Part visual inspection & dimension inspection;

3) Mold inspection before T1 trial;

4) Mold CMM inspection;

5) Mold disassembly to inspect cooling system, injection system, ejection system before shipment, etc

The way how you cooperate with us, is normally customer send part drawing to us, we will offer not only quotation list, but also DFM, PART FEASIBILITY REPORT, MOLD FLOW ANALYSIS REPORT, and sometimes BOM LIST as customer’s demands, of course also mold 3D for customer checking. Mold design is key of a good quality mold as so many structure in a mold, it’s huge and hard jobs, including insert/slider/cooling system, ejection system, hot runner system and movement mechanism etc ,if without good design you will have trouble in the future.

One of the particular features of HoMe Mould is our short development time enabling us to bring to market new products in a short space of time. And all molds are meticulously desingned to achieve high efficiency, high precision and long mold life.

Mold Material &. Plastics Commonly

Steel material: C45, C50, P20, 718, 2738, H13, 1.2311, 1,2344, S136, Nak80, SKD61, etc.

Plastic material:PP, ABS, PA6(66), PE, PC, PS, PVC, etc.

About HoMe Company

Hongmei Mould knowledge and experience to share and discuss with customers, puts forward technology forward ideas, participates in customer product design, we will timely pass on product structure design, product mold manufacturability, mold drawings and 3D to customers, give customers a direct view, inform customers about product design opinions, mold manufacturing ideas, and shoulder to shoulder with customers to avoid development risks.

In many stages of project development, project personnel and technical designers discuss design, development and manufacturing in strict accordance with project management methods, in order to provide customers with the most perfect solutions and ensure that the quality of project development exceeds customer requirements.

Contact Us