Features of plastic cat carrier capsule box
【High Quality】This airline-adaptable pet kennel is built with heavy-duty plastic for strength & security. Perfect for dogs & pets up to 10 lbs.
【Convenience】The pet kennel includes nuts & bolts for quick setup. A carrying handle & easy-open front latch and ventilated openings on the sides provide added convenience for travel.
【Air Travel Approved】This pet carrier meets most airline cargo specifications. The air travel kennel for dogs & cats also has ventilation on all sides, a durable comfort-grip handle for comfy, stress-free transport.
【Perfect For Pet】Koreyosh pet carrier is ideal for dogs, cats, rabbits, or some other pets.
【Dimension】18” L x 12” H x 11” W for up to 10lbs pets.
What facts will influence the box mold quality?
The Plastic Cat Carrier Capsule Box Mold building is very complicated. So many details need to work together. From design, machining, assembling, test and fix then finally go into the service. A lot of factors will affect the quality and performance of mold. We need to truly understand it to make the mold building get better.
1. Steel Type and Quality
The steel type and quality is the most important thing for mold. It is the beginning and base for everything. So choose the right steel material is very important. There are many types of mold steel. Such as the D3, A2, O2, D2 tool steel of cold-rolled steel; H11, 1.2344, H13 tool steel of hot rolled steel, and more. And maybe you need to focus on the points below to choose the right one.
The demand for material for injection molding is that different plastic needs to pair up with different steel materials. And it also has a demand for corrosion resistance and polishing.
If the steel function is enough, then it is the best. Pay a lot of money to get much high steel performance is not necessary.
Surface treatment also is very important. Nitrogen treatment can make the steel surface hardness get higher and make its surface life get longer. And electroplating can change the performance of mold steel. Some plastics need high luminance and corrosion-resistant, then we can use electroplating to raise and change the performance of steel.
2. Structure Design
Good structure design not just consider the product material property: shrinkage ratio, the temperature of forming, and more. But also need to think of the water part of the cooling. Great structure design can enhance the mold work time and maintain it can successfully produce products. That is huge for raising efficiency and cut down the cost.
3. Mold Craftmanship
We all need good mold craftmanship to make it great. Great craftmanship can cut down the cost and working time efficaciously. If there are mistakes, it will cause the mold to become soldering. By the way, worse processing will influence the function of mold, decrease the life of the mold, even it will get hurt and breakage in the processing of injection molding.
The polishing is the final part of mold production. Polishing also helps and complements the mold action, especially for mold release. Lots of the production of some molds are not smooth because the lighting is not in place, the resistance is too large, the demolding is difficult, and even the top is white and the top is cracked.
5. Mold Assembly
The mold is just like assembling a machine. Every part and every screw must not go wrong, otherwise, the consequences will be quite serious. May cause product defects, affect production, and even completely damage the mold, resulting in scrap. So the assembly work must be very detailed. During the assembly process, pay special attention to the cleaning of the mold, especially the water channels and screw holes. Be sure to blow off the iron filings inside.
6. Mold Cooling
Anyone with years of mold experience knows how important cooling is to mold. Due to the increase in prices and human wages, when producing products in large quantities, the profit brought by reducing the injection cycle by one second is unimaginable. However, when the production cycle is accelerated, the temperature of the mold will rise. If it is not effectively controlled, it will cause the mold to be too hot to form, and even cause the mold to deform and fail. Therefore, good cooling system design is particularly important, including the density, diameter, and interconnection of water channels.
7. Mold Maintenance
Mold maintenance is mainly maintenance and maintenance during production. Molds are like cars. If it is not used for a long time without maintenance, it may be scrapped and die. Therefore, after each use of the mold, comprehensive maintenance is required, especially the rust prevention of the molding part, and the rust prevention of the main moving parts. Because the mold needs to receive water during the production process, the mold may be filled with water during the installation or disassembly process, so it is necessary to ensure that the mold is dry before applying a layer of oil to protect it.
Details we need to focus on it and do it in the right way to make sure to produce a good mold to create a good product line.
Design and product development in Hongmei Mold
We pride ourselves on customer satisfaction with Plastic Cat Carrier Capsule Box Mold. Our team of experts is ready to work with you to provide best-in-class product design support.
At the very beginning, we will work closely with our clients, trying to understand their needs, then use advanced software like Pro-E and CAM system to transform these needs into the optimal part design. This is the so-called DMF (design for manufacturability). It’s a very important process, which will save money and lead time for the project to be on market.
Mold manufacture in Hongmei Mold
Hongmei Mold’s engineers have been producing injection molds for 15+ years, who knows all the pitfalls connected with building a high-quality mold.
We work closely with our clients, using the latest processing technologies, to build quality molds as per the request specified and mutually agreed upon. You can rely on our expertise and craftsmanship for a new mold to be built or modification on some existing molds.
Plastic parts mass production
If you have less budget for mold mass production, Hongmei Mold would like to help you to produce Cat Carrier Capsule Box Mold. We have cooperated plastic injection factory which can satisfy your demands.