Plastic Rice Cooker Mould Design Attention to Problems Supplier

2021-02-27

Plastic Rice Cooker Mould Design Attention to Problems Supplier

 

 Hongmei Mould is a professional plastic mould supplier, with rich experience in the design and manufacture of plastic mould, such as plastic rice cooker mould, plastic air conditioning mould, plastic toy mould and so on. Hongmei Mould in the plastic mould design inspection, through accurate analysis, foresee the rationality of the plastic mould design analysis, the best processing analysis and plastic mould structure application, can provide the most professional solutions, and according to customer requirements to provide the most appropriate plastic mould performance and technical specifications. 

 plastic rice cooker mouldplastic rice cooker mould

The following is about the plastic rice cooker mould design should pay attention to:

1. The glue inlet should be set on the thick part of the product to ensure smooth and complete filling.

2. Try not to affect the appearance and function of the product, can be in the edge or bottom. 

3. In the cold material hole near the gate, the end of the pull rod is often set to facilitate the sprue demoulding.

4. Large or flat products, it is recommended to use multi-point feeding, can prevent product warpage deformation and lack of material. 

5. Its position should be selected in the shortest plastic mould filling process, in order to reduce the pressure loss, is conducive to mould exhaust. 

6. Avoid opening gates near the thin and long core, so as to avoid direct impact of the material flow on the core, resulting in deformation and dislocation or bending.

7. The gate size is determined by the product size, geometric shape, structure and plastic type, can first take a small size and then according to the test status of the mould correction. 

8. Through the mould flow analysis or experience, to determine whether the product due to the location of the gate combined with the line, affect the appearance and function of the product, can be added to solve the cold material hole.

9. When a mould is multi-hole, the same product adopts symmetrical feeding method. When different products are formed in the same mould, the largest product is placed close to the main channel first.

      If you want to customize the plastic rice cooker mould.Welcome to contact, inquiry.

Tel:0086-15867668057 Miss Libby Ye

Whatsapp:0086-15867668057

E-mail:info@hmmouldplast.com



X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy