Professional plastic mould maker for Pneumatic Diaphragm Pump Injection Mold PTFE Air Pump Muold Membrane Pump Tooling

Hongmei mould have rich experience in making PTFE pneumatic diaphragm pumps mould air pump molding.Hongmei have more than 20 years specilized in injection manufacturing area.

Hongmei is technical manufacturer for Solar Submersible Diaphragm Pump moulds.

The importance of molds in the production process of PTFE pneumatic diaphragm pumps moulds is self-evident. However, it is crucial to do a good job in rust prevention before the mold is shipped to ensure its safety and stability during transportation and use. Hongmei will take you to explore the importance, methods, and precautions of rust prevention before the shipment of pneumatic diaphragm pump molds.

1、 The importance of rust prevention work for pneumatic diaphragm pumps moulds

The rust prevention work of the mold is a key step to ensure that it remains in good condition before use. Rust not only affects the accuracy and lifespan of molds, but may also lead to malfunctions and waste during the production process. Doing a good job in rust prevention can prolong the service life of molds, improve production efficiency, and reduce maintenance costs.

2、 Rust prevention methods for air pump mould

a.) Cleaning: Before shipping the Submersible Diaphragm Pump mold, the surface of the mold should be thoroughly cleaned to remove oil and impurities. This helps to reduce the chance of rusting.

b.) Applying rust inhibitor: Rust inhibitor is an effective anti rust material that can be used on the surface of Air Pneumatic Diaphragm Oil Pump molds. It can form a protective film on the surface of the mold, preventing water and oxygen from coming into contact,thereby achieving rust prevention effect.

c.) Spray protective layer: After applying rust inhibitor, a protective layer such as plastic film, paint, etc. can be added to the surface of the mold by spraying or other methods to enhance the rust prevention effect.

d.) Storage environment: To ensure the dryness and ventilation of the mold storage environment, and to avoid the influence of moisture and moisture.

3、 Precautions

a.)  Rust prevention work should be completed before the air pump mold is shipped to ensure that it is not affected during transportation.When cleaning and applying rust inhibitors, it is necessary to ensure that operators wear protective gloves and masks to avoid the impact of harmful substances on the human body.

b.) The storage area for Pneumatic Diaphragm Pump molds should be dry, ventilated, and avoid dampness and water accumulation.Before use, the rust prevention effect of the air pump mould should be checked again to ensure that it does not rust during use.From the above analysis, we can see that the rust prevention work of the pneumatic diaphragm pump mould before shipment is crucial. Measures such as cleaning, applying rust inhibitors, spraying protective layers, and controlling the storage environment can effectively prevent mold corrosion during transportation and use. When implementing rust prevention work, attention should be paid to operational safety to ensure the health and safety of personnel. Only in this way can we ensure the performance and stability of the pneumatic diaphragm pump mold, improve production efficiency, and reduce maintenance costs.

Any questions about Pneumatic Diaphragm Pump Injection Mold PTFE Air Pump Muold Membrane Pump Tooling,Welcome contact us!